24 Peg Hook Head, Crank Up Style Tree Topper/Hook Head, for 1.5" Pipe/Pole

Our 24 peg crank up style tree topper Hook Head for 1.5" threaded pipe is designed to be used with all types of lighting including pixel strips, pixels strings, and traditional string lighting.

The bolts allow it to be used as a traditional type of hook head or they can be used to bolt RGB pixel strips strips directly to the topper.

The kit includes:

• The 24 hole topper plate
• 1.5" screw on topper/hook head and mounting bolts
• 24 bolts to attach pixel strips or to be used as hooks for traditional strings
• Eye bolts for attaching your lift cable
• Star mount adaptor NOT included with the crank up style hook head

If you want to attach a star to the top of your pole, you will need our guy wire adaptor kit, sold separately.

Add our Meg Tree Pulley kit along with the hook head and Guy Wire Adaptor Kit and you have a complete crank up style mega tree hook head solution.

*** BE CAREFUL - with the crank up hook head, in many cases, there will be nothing stopping your hook head from flying off the top of your pole if you crank it too high. We recommend the guy wire adaptor kit to elimnate this possibility.

NOTE:  The hook head will pass over a 1.5 electrical conduit and coupling. It will NOT pass over a plumbing coupling. Thats why we specify the use of Rigid Electrical conduit for the center pole not EMT or plumbing pipe.

An electrical coupling is much thinner than a plumbing coupling

Electrical coupling

https://www.lowes.com/pd/Sigma-Electric-ProConnex-1-1-2-in-Threaded-Coupling-Intermediate-Metal-Conduit-Compatible-Galvanized-Rigid-Conduit-Compatible-Rigid-Metal-Conduit-Compatible-Conduit-Fitting/3390622

Plumbing coupling

https://www.lowes.com/pd/Mueller-Proline-1-2-in-x-1-2-in-dia-Black-Iron-Coupling-Fitting/4330114?cm_mmc=shp-_-c-_-prd-_-plb-_-ggl-_-LIA_PLB_142_Pipe-Fittings-_-4330114-_-local-_-0-_-0&ds_rl=1286981&gclid=Cj0KCQjwmdGYBhDRARIsABmSEeO9Tgpci-8Ig96yOG1l3j9KliQTok05gQswzq65q--Cj9xJud4oEfYaAgAjEALw_wcB&gclsrc=aw.ds

Outside diameter of the center sleeve is 2.15" (2 and 5/32")
Outer diameter of the hook head plate is 8.75" (8 and 3/4")

Assembly required